Tekin - FX-R PRO ESC - TT1093

Tekin – FX-R PRO ESC – TT1093

Hinta
125,00 €
Saatavuus
Varastossa

The FX series leads the industry in brushed competition performance. With its ultra-small footprint and flash-programmable microcontrollers with the lowest on-resistance MOSFETS ever used in a speed controller, the FX completely eliminates any power bottleneck between your battery and motor, increasing efficiency and breathing new life into your brushed motors. The FX has thousands of possible settings right on-board with Tekin’s QuickTune™ Programming and is also capable of extensive tuning and updates when used with Tekin’s HotWire PC Interface (sold separately).

The FX-R reversing speed controller leads the industry in pure rock crawling performance. With its tiny footprint, improved drag brake resolution with lock-down holding power, adjustable reverse type with reverse delay, no reverse or instant reverse, ultra smooth low speed creep and precision throttle and braking response, the FX-R easily gives you the edge over the competition. The FX-R has thousands of possible settings right on-board with Tekin’s QuickTune™ Programming and is capable of extensive tuning and updating when used with Tekin’s HotWire PC Interface*. The FX-R can also take on your power needs with 3S Li-Po compatibility when used with 35 turn or higher motors. Install the FX-R and step up to smarter, smaller, faster electronics. And if you have an older FX-R you can download the latest software updates with our HotWire interface.

Features

  • Ultra-smooth and Precise Throttle and Braking Control
  • Easily Access Programming, Anywhere, Anytime
  • HotWire PC Interface for Advanced Programming and Updating
  • On-Board Temperature Indicator
  • HDAC: High Density Copper PCB’s
  • Gold-plated Solder Posts for Easy Wire Replacement
  • Self Test Diagnostics and Factory Reset
  • Pit Tune Mode
  • DGF2: Digital Glitch Filtering V2
  • QuickTune™ Programming
  • One-Touch Radio Calibration
Specs
Controls: Forward/Brake/Reverse
Input Voltage: 2S-3S LiPo / 4-9S NiMH-NiCD
BEC: 6.0v @ 3amps External BEC needed for 3S applications
Motor Limit 2S: 10T Brushed 540
Motor Limit 3S: 35T Brushed 540 Crawler
Throttle Profiles: 7 choices on board
Reverse Type: None / Immediate / Delay
Reverse Strength: 11 steps on board
Drag Brake: 11 steps on board
Brushed Modes: FWD Only / FWD-REV / FWD-REV Delay
Dimensions: 28 × 20 × 15.25mm
Weight: 24.5g

Kategorian tuotteet